Blanket Designs
- Y. Shimomura, et al., “ITER Engineering Design”, Journ. Plasma & Fusion Res., Vol. 78, Supplement 2002.
- M. Enoeda, et al., “Design and technology development of solid breeder blanket cooled by supercritical water in Japan”, Nuclear Fusion, volume 43, issue 12, pages 1837 - 1844 (2003)
Development of ITER Shield Blanket
- S. Sato et al., "Optimization of HIP bonding conditions for ITER shielding blanket/first wall made from austenitic stainless steel and dispersion strengthened copper alloy", J. Nucl. Mater. 258-263, 265(1998).
- S. Sato et al., "Development of first wall/blanket structure by hot isostatic pressing (HIP) in the JAERI", Fusion Eng. Des. 39-40, 609(1998).
- T. Hatano et al., "Fracture strengths of HIPed DS-Cu/SS joints for ITER shielding blanket/first wall", J. Nucl. Mater. 258-263, 950(1998).
- T. Hatano et al., "High heat flux testing of a HIP bonded first wall panel with built-in circular cooling tubes", Fusion Eng. Des. 39-40, 363(1998).
- S. Sato et al., "Fabrication of an ITER shielding blanket prototype", Fusion Technology, 34, 892(1998).
- K. Ioki, et al., “ITER nuclear components, preparing for the construction and R&D results”, Journal of Nuclear Materials 329-333 (2004) 31-38.
- M. Enoeda, “Development of Fabrication Technology of ITER Shielding Blanket”, Journ. Hogh Temperature Society, Vol.30, No.5 2004(Sept. 2004）256-262.
Development of Power Generation Blanket
- T. Kurasawa et al., "Diffusion bonding of reduced activation ferritic steel F82H for demo blanket application", J. Nucl. Mater. 233-237, 313(1996).
- M. Oda et al., "Development of HIP bonding procedure and mechanical properties of HIP bonded joints for reduced activation ferritic steel F82H", JAERI-Tech 97-013, (1997).
- T. Hatano, et al., “High heat flux test of a HIP-bonded first wall panel of reduced activation ferritic steel F-82H”, J. Nucl. Mater. 283-287 (2000) 685-688
- T. Hirose, et al., “Effects of Heat Treatment Process for Blanket Fabrication on Mechanical Properties of F82H”, Journal of Nuclear Materials, 329-333, (2004) pp.324-327.
- M. Enoeda, et al., “Plan and Strategy for ITER Blanket Testing in Japan”, Fusion Science & Technol., Volume 47, Number 4, May 2005, Pages 1023-1030.
- M. Enoeda, et al., “Development of Solid Breeder Blanket at JAERI”, Fusion Science & Technol., Volume 47, Number 4, May 2005, Pages 1060-1067.