【2020】
- Sumida, S., Shinohara, K., Nishitani, T., et al., "Conceptual design of a collimator for the neutron emission profile monitor in JT-60SA using Monte Carlo simulations," Review of Scientific Instruments, 91, 113504 (2020). DOI
- Yamazaki, R., Sakata, S., Oshima, T., et al., "Development of JT-60SA experiment database system,” Fusion Engineering and Design, 155, 111555 (2020). DOI
- Urano, H., Miyata, Y., Suzuki, T., et al., "Breakdown optimization method based on inverse reconstruction of magnetic fluxes in JT-60SA," Nuclear Fusion, 60, 066002 (2020). DOI
- Pasqualotto, R., Tojo, H., Fassina, A., et al., "Conceptual design of JT-60SA edge Thomson scattering diagnostic," Journal of Instrumentation, 15, C01011 (2020). DOI
【2019】
- Yamoto, S., Hoshino, K., Homma, Y., et al., "Study of multiple impurity seeding effect using SONIC integrated divertor code for JT‐60SA plasma prediction," Contributions to Plasma Physics (2019). DOI
- Giruzzi, G., Yoshida, M., Aiba, N., et al., "Advances in the physics studies for the JT-60SA tokamak exploitation and research plan," Plasma Physics and Controlled Fusion, 62, 014009 (2019). DOI
- Ohtani, Y., Yoshida, M., Honda, M., et al., "Scaling study for positive magnetic shear ELMy H-mode plasmas in JT-60U," Plasma Physics and Controlled Fusion, 61, 125011 (2019). DOI
- Bando, T., Matsunaga, G., Takechi, M., et al., "Experimental observations of an n = 1 helical core accompanied by a saturated m/n = 2/1 tearing mode with low mode frequencies in JT-60U," Plasma Physics and Controlled Fusion, 61, 115014 (2019). DOI
- Tojo, H., Sasao, H., Oyama, N., et al., "Laser transfer technique using wavefront correction and beam homogenizers in Thomson scattering diagnostics," Fusion Enginnering and Design, 146, 1676 (2019). DOI
- Vega, J., Hernández, F., Dormido-Canto, S., et al., "Assessment of linear disruption predictors using JT-60U data," Fusion Engineering and Design, 146, 1291 (2019). DOI
- Kamiya, K., Itoh, K, Itoh, S.-I., et al., "Multiple plasma transport states in the H-mode transition on JT-60U," Nuclear Fusion, 59, 086046 (2019). DOI
- Wakatsuki, T., Suzuki, T, Hayashi, N., et al., "Safety factor profile control with reduced central solenoid flux consumption during plasma current ramp-up phase using a reinforcement learning technique," Nuclear Fusion, 59, 066022 (2019). DOI
- Urano, H., Sakata, S., Yamazaki, R., "3. Data Acquisition and Analysis Infrastructure in JT-60SA 3.3 Database Access Infrastructure in JT-60SA," J. Plasma Fusion Res. 95, 220 (2019). (in Japanese) [PDFファイル/2.45MB]
- Nakano, T., Sakata, S., Yamazaki, R., et al., "3. Data Acquisition and Analysis Infrastructure in JT-60SA 3.2 Data Acquisition in JT-60SA," J. Plasma Fusion Res. 95, 216 (2019). (in Japanese) [PDFファイル/2.45MB]
- Yamazaki, R., Sakata, S., Urano, H., "3. Data Acquisition and Analysis Infrastructure in JT-60SA 3.1 Database Structure in JT-60SA," J. Plasma Fusion Res. 95, 213 (2019). (in Japanese) [PDFファイル/2.45MB]
- Yokoyama, T., Miyoshi, Y., Hiwatari, R., et al., "Prediction of high-beta disruptions in JT-60U based on sparse modeling T using exhaustive search," Fusion Engineering and Design, 140, 67 (2019). DOI
- Nakano, T., Asakura, N., "Spatial distribution of Ne ions in detached divertor plasmas of JT-60U," Nuclear Materials and Energy, 18, 356 (2019). DOI
- Sumida, S., Shinohara, K., Ikezoe, R., et al., "Characteristics of fast 3He ion velocity distribution exciting ion cyclotron emission on JT-60U," Plasma Physics and Controlled Fusion, 61, 025014 (2019). DOI
【2018】
- Honda, M., Satake, S., Suzuki, Y., et al., "Effects of the applied magnetic fields with various toroidal phase differences on the neoclassical toroidal viscosity in JT-60SA," Nuclear Fusion, 58 112012 (2018). DOI
- Sano, R., Fukumoto, M., Nakano, T., et al., "Conceptual design for resistive bolometer system with multiple apertures for measurement of total radiated power in JT-60SA," Review of Scientific Instruments 89, 10E104 (2018). DOI
- Sano, R., Fukumoto, M., Nakano, T., et al., "New design techniques of resistive bolometer system for analysis of total radiated power," Review of Scientific Instruments 89, 083501 (2018). DOI
- Ohtani, Y., Sasao, H., Sakuma, T., et al., "Development of thermal image plate using ceramics luminescence materials for aligning and stabilizing beam axis of CO2 laser," Review of Scientific Instruments, 89, 10B104 (2018). DOI
- Hayashi, N., Hoshino, K., Honda, M., et al., "Predictive modelling of JT-60SA high-beta steady-state plasma with impurity accumulation," Nuclear Fusion, 58, 66001 (2018). DOI
- Douai, D., Goodman, T., Isayama, A., et al., "Development of helium electron cyclotron wall conditioning on TCV," Nuclear Fusion, 58, 26018 (2018). DOI
【2017】
- Sumida, S., Shinohara, K., Ikezoe, R., et al., "Comparison of Dispersion Model of Magneto-Acoustic Cyclotron Instability with Experimental Observation of 3He Ion Cyclotron Emission on JT-60U," Journal of the Physical Society of Japan, 86, 124501 (2017). DOI
- Lang, P.T., Nakano, T., Peourie, B., et al., "Conceptual design status of the JT-60SA pellet launching system," Fusion Engineering and Design, 123, 167 (2017). DOI
- Moro, A., Coda, S., Douai, D., et al., "Electron cyclotron stray radiation detection and machine protectionsystem proposal for JT-60SA," Fusion Engineering and Design, 123, 435 (2017). DOI
- Tojo, H., Hatae, T., Hamano, T., et al., "Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic," Fusion Engineering and Design, 123, 678 (2017). DOI
- Kamiya, K., Itoh, K., Itoh, S.-I., et al., "Role of electric field curvature in the formation of edge transport barrier in the JT-60U tokamak," Plasma Physics and Controlled Fusion, 60, 014023 (2017). DOI
- Fukumoto, M., Nakano, T., Itami, K., et al., "Efficiency improvement by application of horizontal magnetic fields for second- and fundamental harmonic EC wall conditioning in JT-60U," Nuclear Materials and Energy, 12, 725 (2017). DOI
- Hayashi,N., Garcia, J., Honda, M., et al., "Transport modelling of JT-60U and JET plasmas with internal transport barriers towards prediction of JT-60SA high-beta steady-state scenario," Nuclear Fusion, 57, 126037 (2017). DOI
- Kamiya, K., Itoh, K., Itoh, S.-I., "Reduction of ion thermal transport due to the non-uniformity effects of the radial," Nuclear Fusion, 57, 126003 (2017). DOI
- Sano, R., Mukai, K., Peterson, BJ., et al., "Development of bolometric tomography technique for high-contrast radiation distribution in toroidal devices," Review of Scientific Instruments 88, 935046 (2017). DOI
- Sano, R., Mukai, K., Peterson, BJ., et al., "Conceptual design of imaging bolometer for use of computed tomography in JT-60SA," Review of Scientific Instruments 88, 53506 (2017). DOI
- Fukumoto, M., Nakano, T., Itami, K., et al., "Efficiency improvement by application of horizontal magnetic fields for second- and fundamental harmonic EC wall conditioning in JT-60U," Nuclear Materials and Energy, 000, 1 (2017). DOI
- Cruz, N., Tommasi, G.De., Mattei, M., et al., "Control-oriented tools for the design and validation of the JT-60SA magnetic control system," Control Engineering Practice, 63, 81 (2017). DOI
- Sasao, H., Arakawa, H., Imazawa, R., et al., "Optimization of magnifying a polarization angle with Littrow layout blazed gratings," Review of Scientific Instrument, 88, 36108 (2017). DOI
- Narita, E., Honda, M., Yoshida, M., et al., "Effects of toroidal rotation on electron heat transport via changes in inertial force and impurity density," Plasma Physics and Controlled Fusion, 59, 044012 (2017). DOI
【2016】
- Kobayashi, T., Itoh, K., Ido, T., et al., "Experimental Identification of Electric Field Excitation Mechanisms in a Structural Transition of Tokamak Plasmas," Scientific Reports (Internet), 6, 30720 (2016). DOI
- Kamiya, K., Itoh, K., Itoh, S.-I., "Experimental validation of non-uniformity effect of the radial electric field on the edge transport barrier formation in JT-60U H-mode plasmas," Scientific Reports (Internet) 6, 30585 (2016). DOI
- Nakata, M., Honda, M., Yoshida, M., et al., "Validation studies of gyrokinetic ITG and TEM turbulence simulations in JT-60U tokamak using multiple flux matching," Nuclear Fusion, 56, 086010 (2016). DOI
- Kawashima, H., Shimizu, K., Hoshino, K., et al., "Simulation of Radiative Divertor Plasmas by Ar Seeding with the FullW-Wall in JT-60SA," Contrib. Plasma Phys, 56, 778 (2016). DOI
- Wakatsuki, T., Suzuki, T., Uzuki, N., et al., "Investigation of Ideal-MHD Stable Scenario for Plasma Current Ramp-Up with No Magnetic Flux Consumption in JT-60SA," Plasma and Fusion Research, 11, 2403068 (2016). DOI
【2015】
- Urano, H., Aiba, N., Kamiya, K., et al., "Dependence of pedestal structure on collisionality at fixed beta in JT-60U," Nuclear Fusion, 56, 016005 (2015). DOI
- Natsume, K., Murakami, H., Kizu, K., et al., "Cryogenic thermometry for refrigerant distribution system of JT-60SA," IOP Conference Series: Materials Science and Engineering, 101, 012113 (2015). DOI
- Sukegawa, A.M., Okuno, K., "Comparison Between Simulations Using the PHITS Code and Activated Material Analysis," IEEE Transactions on Plasma Science, 43, 3916 (2015). DOI
- Higashijima, S., Kamada, Y., Barabaschi, P., et al., "Present status of manufacturing and R&Ds for the JT-60SA tokamak," Fusion Science and Technology, 68, 259 (2015). DOI
- Hayashi, T., Sakurai, S., Sakasai, A., et al., "Development of remote pipe welding tool for divertor cassettes inJT-60SA," Fusion Engineering and Design, 101, 180 (2015). DOI
- Urano, H., Fujita, T., Ide, S., et al., "Development of operation scenarios for plasma breakdown and current ramp-up phases in JT-60SA tokamak," Fusion Engineering and Design, 100, 345 (2015). DOI
- Sukegawa, A.M., Murakami, H., Matsunaga, G., et al., "Estimation of the lifetime of resin insulators against bakingtemperature for JT-60SA in-vessel coils," Fusion Engineering and Design, 98-99, 2076 (2015). DOI
- Shibama, Y., Okano, F., Yagyu, J., et al., "Welding technology on sector assembly of the JT-60SA vacuum vessel," Fusion Engineering and Design, 98-99, 1614 (2015). DOI
- Tsuru, D., Sakurai, S., Nakamura, S., et al., "Development of residual thermal stress-relieving structure of CFC monoblock target for JT-60SA divertor," Fusion Engineering and Design, 98-99, 1403 (2015). DOI
- Matsunaga, G., Takechi, M., Sakurai, S., et al., "In-vessel coils for magnetic error field correction in JT-60SA," Fusion Engineering and Design, 98-99 1113 (2015). DOI
- Kizu, K., Murakami, H., Natsume, K., et al., "Manufacturing design and development of the current feeders andcoil terminal boxes for JT-60SA," Fusion Engineering and Design, 98-99, 1094 (2015). DOI
- Takechi, M., Matsunaga, G., Sakurai, S., et al., "Development of magnetic sensors for JT-60SA," Fusion Engineering and Design, 96-97, 985 (2015). DOI
- Obana, T., Murakami, H., Takahata, K., et al., "Performance verification tests of JT-60SA CS model coil," Physica C, 518, 96 (2015). DOI
- Murakami, H., Kizu, K., Ichige, T., et al., "Development of terminal joint and lead extension for JT-60SA central solenoid," IEEE Transactions on Applied Superconductivity, 25, 4201305 (2015). DOI
- Nakamura, K., Yamamoto, Y., Suzuki, K., et al., "Evaluation of Temperature Rise Caused by AC Loss Due to Plasma Disruption in Joint of JT-60SA Poloidal Field Coil," IEEE Transactions on Applied Superconductivity, 25, 4200704 (2015). DOI
- Naito, O., "An analytic formula for the relativistic incoherent Thomson backscattering spectrum for a drifting bi-Maxwellian plasma," Physics of Plasmas, 22, 084505 (2015). DOI
- Miyata, Y., Suzuki, T., Takechi, M., et al., "Assessment of accuracy of plasma shape reconstruction by the Cauchy condition surface method in JT-60SA," Review of Scientific Instruments, 86, 073511 (2015). DOI
- Nakano, T., and JT-60 team, "Comparison of Ne and Ar seeded radiative divertor plasmas in JT-60U," Jounals of Nuclear Materials, 463, 555 (2015). DOI
- Fukumoto, M., Nakano, T., Ueda, Y., et al., "Deuterium retention in tungsten coating layers irradiated with deuterium and carbon ions," Journal of Nuclear Materials, 462, 354 (2015). DOI
- Koide, Y., Yoshida, K., Wanner, M., et al., "JT-60SA Superconducting Magnet System," Nuclear Fusion, 55, 086001 (2015). DOI
- Yoshida, M., Honda, M., Narita, E., et al., "Effects of toroidal rotation shear and magnetic shear on thermal and particle transport in plasmas with electron cyclotron heating on JT-60U," Nuclear Fusion, 55, 073014 (2015). DOI
- Honda, M., Satake, S., Suzuki, Y., et al., "Integrated modelling of toroidal rotation with the 3D non-local drift-kinetic code and boundary models for JT-60U analyses and predictive simulations," Nuclear Fusion, 55, 073033 (2015). DOI
- Kobayashi, T., Moriyama, S., Yokokura, K., et al., "Gyrotron development for high-power, long-pulse electron cyclotron heating and current drive at two frequencies in JT-60SA and its extension toward operation at three frequencies," Nuclear Fusion, 55, 063008 (2015). DOI
- Wakatsuki, T., Suzuki, T., Hayashi, N., et al., "Simulation of plasma current ramp-up with reduced magnetic flux consumption in JT-60SA," Plasma Physics and Controlled Fusion, 57, 65005 (2015). DOI
- Narita, E., Honda, M., Hayashi, N., et al., "Gyrokinetic analyses of core heat transport in JT-60U plasmas with different toroidal rotation direction," Plasma and Fusion Research, 10, 1403019 (2015). DOI
- Naito, O., "A GUI-based intuitive tool for analyzing formats and extracting contents of binary data in fusion research," Fusion Engineering and Design, 92, 1 (2015). DOI
- Urano, H., Nakata, M., Aiba, N., et al., "Roles of argon seeding on energy confinement and pedestal structure in JT-60U," Nuclear Fusion, 55, 33010 (2015). DOI
- Obana, T., Takahata, K., (Kizu, K.,) et al., "Magnetic field measurements of JT-60SA CS model coil," Fusion Engineering and Design, 90, 55 (2015). DOI
【2014】
- Kamiya, K., Honda, M., Urano, H., et al., "Boundary condition for toroidal plasma flow imposed at the separatrix in JT-60U ELMy H-mode plasmas, and physics process in pedestal structure formation," Physics of Plasmas, 21, 122517 (2014). DOI
- Kamiya, K., Itami, K., Takeuchi, M., et al., "Design study of a wide-angle infrared thermography and visible observation diagnostic on JT-60SA," Fusion Engineering and Design, 89, 3089 (2014). DOI
- Urano, H., "Pedestal structure in H-mode plasmas," Nuclear Fusion, 54, 116001 (2014). DOI
- Obana, T., Takahata, K., (Kizu, K.,) et al., "Modeling of Butt Joint Composed of Nb3Sn Cable-In-Conduit Conductors," Plasma and Fusion Research, 9, 3405122 (2014). DOI
- Hayashi, T., Sakurai, S., Shibanuma, K., et al., "Development of remote pipe cutting tool for divertor cassettes in JT-60SA," Fusion Engineering and Design, 89, 2299 (2014). DOI
- Ikeda, Y., Okano, F., Hanada, M., et al., "Safe disassembly and storage of radioactive components of JT-60U torus," Fusion Engineering and Design, 89, 2018 (2014). DOI
- Nakamura, S., Sakurai, S., Ozaki, H., et al., "Infrared thermography inspection for monoblock divertor target in JT-60SA," Fusion Engineering and Design, 89, 1024 (2014). DOI
- Garcia, J., Hayashi, N., Baiocchi, B., et al., "Physics comparison and modelling of the JET and JT-60U core and edge: towards JT-60SA predictions," Nuclear Fusion, 54, 093010 (2014). DOI
- Shinohara, K., Ishii, K., Ochiai, K., et al., "Evaluation of two-stage system for neutron measurement aiming at increase in count rate at JAEA-FNS," Review of Scientific instruments, 85, 11E823 (2014). DOI
- Nakamura, S., Sakurai, S., Ozaki, H., et al., "Infrared thermography inspection for monoblock divertor target in JT-60SA," Fusion Engineering and Design, 89, 1024 (2014). DOI
- Ikeda, Y., Okano, F., Hanada, M., et al., "Safe disassembly and storage of radioactive components of JT-60U torus," Fusion Engineering and Design, 89, 2018 (2014). DOI
- Obana, T., Takahata, K., (Kizu, K.,) et al., "Modeling of Butt Joint Composed of Nb3Sn Cable-In-Conduit Conductors," Plasma and Fusion Research, 9, 3405122 (2014). DOI
- Sasao, H., Arakawa, H., Kubo, H., et al., "Magnification of a polarization angle with a Littrow layout brazed grating," Review of Scientific instruments, 85, 086106 (2014). DOI
- Luce, T.C., Challis, C.D., Ide, S., et al., "Development of advanced inductive scenarios for ITER," Nuclear Fusion, 54, 013015 (2014). DOI
- Kamiya, K., Matsunaga, G., Honda, M., et al., "Edge radial electric field formation after the L-H transition on JT-60U," Contributions to Plasma Physics, 54, 591 (2014). DOI
- Shibata, Y., Isayama, A., Matsunaga, G., et al., "Role of the Electron Temperature in the Current Decay during Disruption in JT-60U," Plasma and Fusion Research, 9, 3402084 (2014). DOI
- Miyata, Y., Suzuki, T., Ide, S., et al., "Study of Plasma Equilibrium Control for JT-60SA using MECS," Plasma and Fusion Research, 9, 3403045 (2014). DOI
- Sukegawa, A.M., Anayama, Y., "Flexible heat-resistant neutron and gamma-ray shielding resins," Progress in Nuclear Science and Technology, 4, 627 (2014). DOI
- Tsuchiya, K., Kizu, K., Murakami, H., et al., "Design of the Pre-compression Mechanism and Gravity Support for the Central Solenoid Assembly in the JT-60SA Tokamak," IEEE Transaction on Plasma Science, 42, 1042 (2014). DOI
- Murakami, H., Kizu, K., Tsuchiya, K., et al., "Development and Test of JT-60SA Central Solenoid Model Coil," IEEE Transaction on Superconductivity, 24, 4200205 (2014). DOI
- Yoshida, K., Murakami, H., Kizu, K., et al., Mass Production of Superconducting Magnet Components for JT-60SA," IEEE Transaction on Superconductivity, 24, 4200806 (2014). DOI
- Takao, T., Kawahara, Y., Nakamura, K., et al., "Thermal Stability of Butt Joint for CS Conductor in JT-60SA," IEEE Transaction on Superconductivity, 24, 4800804 (2014). DOI
- Miyata, Y., Hahn, S.H., Suzuki, T., et al., "Validation of plasma shape reconstruction by Cauchy condition surface method in KSTAR," Physics of plasmas 21, 032502 (2014). DOI
- Nakano, T., Higashijima, S., Kubo, H., et al., "The emission rates of CH, CD and C2 spectral bands and a re-evaluation of the chemical sputtering yield of the JT-60U carbon divertor plates," Nucl. Fusion, 54, 043004 (2014). DOI
- Shibata, Y., Isayama, A., Miyamoto, S., et al., "The Effect of the Electron Temperature and Current Density Profiles on the Plasma Current Decay in JT-60U disruptions," Plasma Physics and Controlled Fusion, 56, 045008 (2014). DOI
【2013】
- A. Bierwage, "Role of convective amplification of n=1 energetic particle modes for N-NB ion dynamics in JT-60U," Nuclear Fusion, 53, 73007 (2013). DOI
- Kobayashi, K., Sasajima, T., "4.2 Radiation Safety Management in the JT-60 Facilities," J. Plasma Fusion Res., 89, 810 (2013). URL
- Sukegawa, A., "4.1 Radiation Measurement for Tokamak Fusion Device Operation under Neutron Environment,"J. Plasma Fusion Res., 89, 805 (2013). [PDFファイル/1.45MB]
- Matsunaga, G., Okabayashi, M., Aiba, N., et al., "Dynamics of energetic particle driven modes and MHD modes in wall-stabilized high-β plasmas on JT-60U and DIII-D," Nuclear Fusion, 53, 123022 (2013). DOI
- Fukumoto, M., Nakano, T., Ueda, Y., et al., "Chemical Binding States of Carbon Atoms Migrated in Tungsten Coating Layer Exposed to JT-60U Divertor Plasmas," Plasma Fusion Res., 8, 1405159 (2013). DOI
- Obana, T., Takahata, K., Hamaguchi, S., et al., "Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils," Fusion Engineering and Design, 88, 2773 (2013). DOI
- Shibama, Y.K., Masaki, K., Sakurai, S., et al., "Welding technology R&D on port joint of JT-60SA vacuum vessel," Fusion Engineering and Design, 88, 1916 (2013). DOI
- Yoshida, K., Kizu, K., Murakami, H., et al., "Feeder components and instrumentation for the JT-60SA magnet system," Fusion Engineering and Design, 88, 1499 (2013). DOI
- Gaio, E., Maistrello, A., Novello, L., et al., "Full Scale Prototype of the JT-60SA Quench Protection Circuits," Fusion Engineering and Design, 88, 563 (2013). DOI
- Tsuchiya, K., Kizu, K., Murakami, H., et al., "Fabrication and installation of equilibrium field coils for the JT-60SA, Fusion Engineering and Design," 88, 551 (2013). DOI
- Miyata, Y., Suzuki, T., Ide, S., et al., "Study of JT-60SA Operation Scenario using a Plasma Equilibrium Control Simulator," Plasma Fusion Res., 8, 2405109 (2013). DOI
- Fukumoto, M., Sakurai, S., Asakura, N., et al., "Development of Langmuir Probes on Divertor Cassettes in JT-60SA," Plasma Fusion Res., 8, 1405153 (2013). DOI
- Yoshida, M., Ide, S., Takenaga, H., et al., "Temporal and spatial responses of temperature, density and rotation to electron cyclotron heating in JT-60U," Nuclear Fusion, 53, 083022 (2013). DOI
- Isayama, A., "2.1 Remote Experiments in JT-60U," J. Plasma Fusion Res., 89, 464 (2013). URL
- Urano, H., Takizuka, T., Aiba, N., et al., "Hydrogen isotope effects on ITG scale length, pedestal and confinement in JT-60 H-mode plasmas," Nuclear Fusion, 53, 083003 (2013). DOI
- Matsunaga, G., Aiba, N., Shinohara, K., et al., "ELM triggering by energetic particle driven mode in wall-stabilized high-β plasmas," Nuclear Fusion 53, 073046 (2013). DOI
- Nakamura, S., Shibama, Y.K., Masaki, K., et al., "Design Study of Top Lid with Clamp Structure in JT-60SA Cryostat," Plasma Science and Technology, 15, 188 (2013). DOI
- Kobayashi, T., Isayama, A., Sawahata, M., et al., "Dual frequency ECRF system development for JT-60SA, Dual frequency ECRF system development for JT-60SA," Transactions of Fusion Science and Technology, 63, 160 (2013). DOI
- Nakano, N., Asakura, N., Kubo, H., "Contribution of Ne ions to radiation enhancement in JT-60U divertor plasmas," Jounals of Nuclear Materials, 433, S291-S296 (2013). DOI
- Matsukawa, M., Shimada, K., Yamauchi, K., "A conceptual design study for the error field correction coil power supply in JT-60SA," Plasma Science and Technology, 15, 257 (2013). DOI
- Naito, O., "A model distribution function for relativistic bi-Maxwellian with drift," Physics of Plasmas, 20, 44501 (2013). DOI
- Isayama, A., Matsunaga, G., Hirano Y., et al., "Onset and Evolution of m/n = 2/1 Neoclassical Tearing Modes in High-βp Mode Discharges in JT-60U," Journal ofphy Plasma and Fusion Research, 8, 1402013 (2013). DOI
- Kizu, K., Murakami, H., Tsuchiya, K., et al., "Development of Central Solenoid for JT-60SA," IEEE Transactions on Applied Superconductivity, 23, 4200104 (2013). DOI
- Shimada, K., Terakado, T., Yamauchi, K., et al., "Minimization of Reactive Power Fluctuation in JT-60SA Magnet Power Supply," Plasma Science and Technology, 15, 184 (2013). DOI
- Yamauchi, K., Shimada, K., Terakado, T., et al., "Detailed Analysis of the Transient Voltage in a JT-60SA PF Coil Circuit," Plasma Science and Technology, 15, 148 (2013). DOI
- Sugimoto M., Kosugi K., Katayama K., et al., "Mass production results of superconducting cables for CS and EF coils of JT-60SA," Proceedings of ICEC 24-ICMC 2012, 799 (2013).
- Kamiya K., Onishi Y., Ichige T., et al., "Design of JT-60SA thermal shield and cryodistribution," Proceedings of ICEC 24-ICMC 2012, 587 (2013).
- Murakami H., Kizu K., Ichige T., et al., "Current sharing temperature of central solenoid conductor for JT-60SA under repetition excitation," Proceedings of ICEC 24-ICMC 2012, 575 (2013).
- Hasegawa M., Horii H., Nomoto K., et al., "Manufacturing of JT-60SA equilibrium field coils," Proceedings of ICEC 24-ICMC 2012, 571 (2013).
【2012】
- Kamiya, K., Ida, K., Yoshinuma, M., et al., "Characterization of edge radial electric field structures in the Large Helical Device and their viability for determining the location of the plasma boundary," Nuclear Fusion, 53, 013003 (2012). DOI
- Miyata, Y., Suzuki, T., Fujita, T., et al., "Development of simulator for plasma position and shape control in JT-60SA," Plasma and Fusion Research, 7, 1405137 (2012). DOI
- Urano, H., Takizuka, T., Fujita, T., et al., "Energy confinement of hydrogen and deuterium H-mode plasmas in JT-60U," Nuclear Fusion, 52, 114021 (2012). DOI
- Urano, H., Takizuka, T., Kikuchi, M., et al., "Small ion-temperature-gradient scale length and reduced heat diffusivity at large hydrogen isotope mass in conventional H-mode plasmas," Physical Review Letters, 109, 125001 (2012). DOI
- Arakawa, H., Kawano, Y., Itami, K., "Identification of errors in the electron density measurements of a tangential interferometer/polarimeter system during a tokamak discharge," Review of Scientific Instruments, 83, 10E345 (2012). DOI
- Ide, S., Hayashi, N., Honda, M., et al., "Plasma Domains and Development of Operation Scenarios in JT-60SA," Plasma and Fusion Research, 7, 2403131 (2012). DOI
- Urano, H., Oyama, N., Kamiya, K., et al., "The unified effect of counter-toroidal rotation and power across separatrix on type-I ELMs in JT-60U," Nuclear Fusion, 52, 103012 (2012). DOI
- Hada, K., Nagasaki, K., (Ide, S.) , et al., "Analysis of ECRH Pre-Ionization for Plasma Start-Up in JT-60SA," Plasma and Fusion Research, 7, 2403104 (2012). DOI
- Murakami, H., Kizu, K., Tsuchiya, K., et al., "Resonance Characteristics and Maximum Turn Voltage of JT-60SA EF Coil," IEEE Transaction on Superconductivity, 22, 9501405 (2012). DOI
- Tsuchiya, K., Kizu, K., Murakami, H., et al., "Manufacture of the Winding Pack and Development of Key Parts for the JT-60SA Poloidal Field Coils," IEEE Transaction on Superconductivity, 22, 4202304 (2012). DOI
- Yoshida, K., Kizu, K., Tsuchiya, K., et al., "The Manufacturing of the Superconducting Magnet System for the JT-60SA," IEEE Transaction on Superconductivity, 22, 4200304 (2012). DOI
- Arakawa, H., Kawano, Y., Itami, K., "Identification of errors in the electron density measurements of a tangential interferometer/polarimeter system during a tokamak discharge," Review of Scientific Instruments, 83, 10E345 (2012). DOI
- Koubiti, M., Nakano, T., Capes, H., et al., "Characterization of the JT-60U Divertor Plasma Region During the Formation of a Strong Radiation," Contribution to Plasma Physics, 52, 455 (2012). DOI
- Isayama, A., Kobayashi, T., Yokokura, K., et al., "Recent Results from the Development of the Electron Cyclotron Heating System for JT-60SA toward High-Power Long-Pulse Operations," Plasma and Fusion Research, 7, 2405029 (2012). DOI
- Tojo, H., Itami, K., Hatae, T., "Principle of an in-situ relative calibration method using a double-pass beam for Thomson scattering diagnostics," Journal of Instrumentation, 7, C05004 (2012). DOI
- Tojo, H., Ejiri, A., Hiratsuka, J., et al., "Demonstration of in-situ relative calibration method for a Thomson scattering diagnostic on TST-2," Journal of Instrumentation, 7, P04005 (2012). DOI
- Suzuki, T., Fujita, T., "Impact of edge localized mode on photo-elastic-modulator based motional Stark effect polarimetry," Fusion Engineering and Design, 87, 188 (2012). DOI
- Yoshida, M., Sakamoto, Y., Honda, M., et al., "Core and edge toroidal rotation study in JT-60U," Nuclear Fusion, 52, 23024 (2012). DOI